![]() Pressing the RAM into the socket will engage these clasps, so they must be disabled before you can remove the currently installed RAM. There are clasps on each end of the socket, which will snap tight around the edge of the RAM when plugged in. If the memory kit is installed in the same color slots and it still shows single channel, typically it is a defective motherboard, but that's just for people troubleshooting. RAM slots or sockets on a PC motherboard are long channels, generally located close to the CPU. If you have CPU-Z, you can also check to see if the system is running in dual or single channel in the memory tab. Now if you use a benchmark test like AIDA64, it will give you the DDR frequency since you are testing the effective frequency. Double that and you get the effective frequency. ![]() In a program like CPU-Z, it shows bus frequencies, so it will show xxxx MHz. Real bus frequency, and effective DDR frequency.ĭDR3-1600 is effective frequency, and the real frequency is half that since DDR is "double data rate". The memory should be installed in the black slots, A2 B2 for dual channel configuration.ĭual channel is having one DIMM in each channel, linking two channels together, Channel A and Channel B.Īlso, there are two different ways of describing memory frequency. Sure, there is just a slight confusion here that I will be glad to clear up.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |